2-41
Motion Detection Setting Tool
VBAdmin Tools
4. Check the motion detection status of the camera.
To check the level of motion detection operation based on the specified settings, select the
[Display motion detection status of the camera] check box. The motion detection status will be
shown by the icons specified below.
If the [Display motion detection status of the camera] check box is selected, the settings
cannot be saved. To save the settings, clear this check box.
5. Click [Save motion detection settings] to save the settings.
Note
zIf a proxy server is used, the video frame rate may drop depending on the proxy load.
Accordingly, it is recommended that you don't connect the camera via a proxy while this
function is set.
zIt is recommended that the motion detection level be set in a condition as close as possible
to the condition in which the camera is actually used.
Tip
zThe status of the detection in peak block view and [Display motion detection status of the
camera] in this tool may not match the actual motion detection status of the camera.
zWhen the motion detection function of the camera is enabled, the video frame rate may
drop compared to when the function is disabled.
zClicking [Edit] in the menu bar and selecting [Copy sensitivity settings] copies the settings
of [Sensitivity], [Size] and [Duration] for the currently selected area (1 to 4). If a different
area (1 to 4) is subsequently selected and [Paste sensitivity settings] is selected from [Edit]
in the menu bar, the copied settings will be pasted to the selected area.
(Detection disabled)
[Detected]
[Not detected]