Canon 3.1 Scanner Selection and Settings, Scanner Selection, Scanner Settings

Scanner Selection and Settings

Scanner Selection

Before using CapturePerfect, follow the procedure below to select a scanner to use with it. The selected scanner setting is retained until another scanner is selected.

Important

Verify that your scanner is properly connected to the computer, and that the scanner and computer are both turned on. Refer to your scanner's operating manual for details.

1Click Select Scanner in the Scan menu. The Select Scanner dialog box appears.

Note

If the name of the scanner does not appear in the dialog box, install the ISIS/TWAIN driver for the scanner.

2Select the scanner to be used, and click the OK button.

The Select Scanner dialog box closes and scanner selection is complete.

Scanner Settings

Before scanning a document, set up the scan settings. Settings remain in effect until changed.

1Click Scanner Setting in the Scan menu, or click the button. The scanner setting dialog box appears.

Note

•The settings dialog box displayed depends on your scanner model.

•Scanner settings can be made in the settings dialog box while scanning. Scanning Methods (→P. 46)

•In case of using the Long Document mode, some functions may be restricted.

2Make the appropriate settings for your scanning conditions.

For help related to these settings, click the Help button in the dialog box to refer to the driver help.

3Click the OK button to exit the settings dialog.

15