–Character Precedence

To prevent character legibility from degrading, only non-character areas are compressed when files are saved.

Note

The Mode setting is only valid when the specified scanning mode is 256-level Gray or 24-bit Color, or when a color document is detected with Detect Color or Binary Image as the scanning mode. If the scanning mode is a two-color mode such as Black and White, or Error Diffusion, the size of the file depends on the size of the document.

•Apply OCR

Select this check box to cause printed characters in the image to be recognized and saved as text data attached to the recognized area.

•Language for OCR

When the Apply OCR check box is selected, you can select from the list box the language of the text to be scanned.

•Detect outlined character

This setting is enabled only when the Apply OCR check box is selected. When this check box is selected, outlines letters in the image can be recognized for the language assigned in Language for OCR.

Note

–For PDF files (*.pdf) with attached OCR information, document character strings scanned as images are recognized as text and saved as text data.

–When the Apply OCR check box is selected, deskewing is performed regardless of the scanner driver's Deskew setting. If you scan sizes smaller than the set scan size or you set the TWAIN driver Margin to a large value, the image is moved to the upper-left corner.

–Depending on documents, some images may be truncated if the Apply OCR box is selected. If this happens clear the Apply OCR check box.

–In case of using the Long Document mode etc., OCR recognition results may not be applied.

•Hi-speed transfer

Hi-speed transfer can be enabled if your scanner supports JPEG transfers. This option may not be displayed or available depending on the scanner you select.

When the scanning mode specified during scanner setup is 256-level Gray or 24-bit Color, this feature applies JPEG compression to images transferred from the scanner to the computer.

•JPEG compression

Selects the image quality when Hi-speed transfer is selected. Setting JPEG Compression (→P. 21)

3Click the OK button.

The Details of File Settings dialog box closes.

20