5When performing batch separation, configure the "Batch Separator".
•The "Batch Separator" settings are the same as those found in the scanner settings dialog box.
–If your scanner supports reading barcodes, you can select Barcode in addition to the setting value for Batch Separation of the scanner. When you select this item, the batch is separated when the barcode is detected.
–If your scanner supports reading patch codes, you can select Patchcode in addition to the setting value for Batch Separation of the scanner. When you select this item, the batch is separated when the patchcode is detected.
–When you select Automatic Feeding for feeding option of the scanner setting, you can select Auto in addition to the setting value for Batch Separation of the scanner. When you select this item, scanning continues as the batch is separated for each batch of documents.
–When you select
6Select the item for MultiPage Settings. MultiPage Settings (→P. 24)
7If you want to set the name of the saved file/folder, select Scheme and set the rule. About Schema (→P. 25)
8Set the other settings to suit the documents to be scanned. About Other Functions (→P. 39)
9Place a document in the scanner. Refer to the operating manual of the scanner for details about placing documents for scanning.
10Click the Save button.
The documents are scanned.
When no documents remain in the scanner, scanning is interrupted and the Continue Scanning dialog box appears.
Note
•If you select "* .pptx" as the saving format, Continue Scanning dialog box is not displayed.
•If the specified file name is the same as that of an existing file, a dialog box prompts to confirm overwriting the existing file. Click the OK button to overwrite the file.
•When "Displays the Continue Scanning dialog box" is disabled (a check mark does not appear in front of it) in Others tab in the Option dialog box, the scan procedure ends when no documents remain in the scanner. Other Settings (→P. 45)
49