
Checking the Battery Level
Check the battery level after replacing the batteries and before using the camera.
Turn the Command Dial to a shooting mode.
• The camera will then turn on and the LCD panel will display one of the following battery level icons:
|
| : Battery level OK. | |
|
| : The battery level is low. Keep | |
|
| spare batteries handy. | |
|
| : The batteries will soon be | |
|
| completely exhausted. | |
|
| : Replace the batteries. | |
|
| (→page 5) |
|
Battery Life |
|
| (With |
Temperature | 0% Flash Use | 50% Flash Use | 100% Flash Use |
At 20˚C | 67 rolls | 30 rolls | 22 rolls |
At | 44 rolls | 20 rolls | 15 rolls |
•The battery life shown in the table is based on the Canon’s testing conditions with new batteries.
• If nothing is displayed on the LCD panel, the batteries may have been installed incorrectly. Take out the batteries and install correctly. (→page 14)
•Pressing the shutter button halfway for a prolonged period or operating only the autofocus without taking a picture will still consume battery power. It will reduce the number of rolls that can be taken with the batteries.
When not using the camera, set the Command Dial to < >.
15