Manuals / Brands / Photography / Digital Camera / Canon / Photography / Digital Camera

Canon 300V, 300V Date, EOS Rebel Ti Body Only, REBEL Ti 300V 2Set the setting to “”, Illuminating the LCD panel, 1 Move the < > arrow to the <> icon

1 60

Download 60 pages, 3.7 Mb

Silencing the Beeper

The beeper can be silenced in all of the shooting modes.

1 Move the < > arrow to the < > icon.

• Look at the LCD panel and press the

< > button. ( )

2Set the setting to “ ”.

•Turn the < > dial.

•To enable the beeper to sound, set to “ ”.

LCD Panel Illumination

Illuminating the LCD panel.

• Press the < > button. ( )

• To turn off the illumination, press the < > button again or press the shutter button halfway.

• While the LCD panel is illuminated, pressing any buttons (except the shutter button) or turning any dials will extend the illumination time.

Using the Remote Switch

Connect the (optional) Remote Switch RS-60E3’s plug to the camera’s remote control terminal. Press the release button to take the picture.

51

Contents

English INSTRUCTIONS Keep this instruction booklet handy for easy reference Before Using Your Camera Conventions Used in this Instructions 1 Before You Start 2 Fully Automatic Shooting 3 User-ControlledShooting Reference Symbols Camera Care and Storage LCD Displays Lithium Batteries How Low Battery Levels Affect Camera Operation Lens Electrical Contacts Install the batteries Attach a lens 5Load the film 3On the lens, set the focus mode switch to < AF 4Turn the Command Dial to <> (Full Auto). (→page 22) Take the picture Unload the film Page Page LCD Panel Viewfinder Information Command Dial Attaching the Strap Installing the Batteries and Checking the Battery Level Installing the Batteries Checking the Battery Level Mounting a Lens Detaching the Lens Pressing the Shutter Button Halfway or Fully Loading Film Checking the Film Speed Unloading Film Midroll Rewind Turn the Command Dial to 1 Turn the Command Dial to 2Aim any of the AF points on the subject 3 Press the shutter button halfway to focus 4Check the exposure setting AF-Assistbeam with the Built-inFlash Portrait Landscape Close-up Sports Night Portrait Flash off Using Red-eye Reduction 1 Showpanel.the < > icon on the LCD 2Take the picture Using the Eyepiece Cover 1 Move the < > arrow to 2Select the date format Setting the Date and Time Page Automatic AF point Selection Manual AF point Selection 1 Press the < > button. ( ) Select the desired AF point 1 Select the desired AF point. (→page 32) 2Focus the subject 4Take the picture Manual Focusing Press the < > button Evaluative metering Partial metering Centerweighted average metering 2Press the shutter button halfway to focus 3 Check the display The Difference Between <> and About Program Shift 2Select the desired shutter speed 3 Press the shutter button halfway to focus the subject 4Check the viewfinder display and take the picture 2Select the desired aperture Page 1 Turn the Command Dial to Press the shutter button halfway 3 to focus the subject Set the desired exposure A-DEP 3 Check the viewfinder display and take the picture 1 Focus the subject Page 2Set the desired AEB amount 3 Take the picture 2Set the shutter speed to “ 4Start the bulb exposure 1 Move the < > arrow to the < > icon 2Set the desired number of multiple exposures In a Basic Zone Mode In a Creative Zone Mode Flash Sync Speeds and Flash Apertures Using the Built-inFlash Flash Distance Range 2Set the desired film speed 1 Move the < > arrow to the <> icon 2Set the setting to “” Illuminating the LCD panel Basic Photography Terms Exposure Warning List Feature Availability Table AF Mode AF Mode and Film Advance Mode Troubleshooting Guide Major Specifications Page Index