Imprinting the Date or Time (DATE Model only)

Setting the Date and Time

1 Move the < > arrow to <>.

Look at the LCD panel and press the

< > button.

If the date and time has not been set,

” will blink on the LCD panel.

2Select the digit to be set.

Press the < > button.

The digit selection will change in the following sequence: year, month, day, hour, minute, “ ”.

3 Set the correct number.

Turn the < > dial.

Repeat steps 2 and 3 until all the date and time digits are set correctly.

4Finalize the date and time setting.

Keep pressing the < > button until no digits are blinking.

If you press the < > button while “ ” is blinking, 0 sec. will be set.

If a picture is taken while the date and time are blinking, the date and time will not be imprinted on that picture.

The date and time setting can be retained for about 10 min. after the cam- era’s batteries are removed.

30