Quick Start Guide

Install the batteries.Attach a lens.

Insert two CR2 lithium bat-

Align the red dots on the

1 teries as shown by the bat-

2lens and camera and turn

tery orientation diagram on

the lens as shown by the

the battery compartment

arrow until it snaps into

cover. (page 14)

place. (page 16)

5Load the film.

Align the edge of the film with the < > mark, and close the back cover until it snaps shut. (page 18)

The film will then advance to the first frame automatically.

6Focus the subject. Aim the AF point on the subject and press the shutter button halfway to auto- focus. (page 22)

Under low-light or backlit conditions, the built-in flash

will pop-up and fire automatically. (page 49)

6