You can magnify the area of a recorded image that was inside the AF Frame
to check thefocus.
.....Touch DISR to switch the focus
check display (p. 44).
A white frame will appear where the AF
frame was when the focus was set.
A gray frame will appear on a face
detected during playback.
The area within theorange frame appears
magnified.
Switch frames.
Touch the lower right image, or move the
zoom lever toward O, once.
The screen shown on the left will appear.
Touch u,,= to move to a different frame
when multiple frames appear.
Change the magnification level or
location.
Moving the zoom lever, or touching the
magnified image on the lower right of the
screen, or _, _ will change the displayed
magnification rate.
Ifyou drag across the image on the lower
right, you can move the location of the
displayed area.
Touching _, or the image in the upper left
resets the display to Step 1.
126