Adjusting the Flash Exposure

Compensation

Just like with exposure compensation (p. 73), you can adjust the exposure ±2 stops in 1/3-stop increments when using the flash.

Choose ~.

●After pressing the m button, press the op buttons to choose ~.

Make the setting.

●Press the qrbuttons or turn the  dial

to choose the flash exposure compensation, then press the mbutton.

X~will appear on the screen.

You can also set the flash exposure compensation by pressing the n button, choosing [Flash Control] from the 4 tab, and then pressing the m button. Choose [Flash Exp. Comp] and use the qr buttons to make the setting. Alternatively, you can press the r button, then the n button. Or, you can press and hold the r button.

Safety FE

The camera automatically changes the shutter speed or aperture value when the flash fires to avoid overexposing and blowing out the highlights in the scene. In the 4 tab, if [Safety FE] in [Flash Control] is set to [Off], the shutter speed and aperture value will not automatically adjust.

105