Adjusting the Flash Output
In D mode, you can choose 3 levels of flash output.
Set the camera to D mode.
Choose the flash output.
●After pressing the m button, press the op buttons to choose ~.
Make the setting.
●Press the qrbuttons or turn the  dial
to choose the flash output, then press the m button.
• You can also set the flash output by pressing the n button, choosing [Flash Control] from the 4 tab, and then pressing the m button. Choose [Flash Output] and use the qr buttons to make the setting. Alternatively, you can press the r button, then the n button. Or, you can press and hold the r button.
•In Mand Bmodes, you can set the flash output if you choose the 4 tab, then [Flash Control] and set the [Flash Mode] option to [Manual].
106