Using an Externally Mounted Flash (Sold Separately)

Attach the flash to the conversion lens adapter.

When attaching the Macro Ring Lite MR- 14EX, press and hold the release buttons on both sides of the Macro Ring Lite and fit it onto the conversion lens adapter.

When attaching the Macro Twin Lite MT-

24EX, attach the flash heads to their respective flash head mounts ( ). Press and hold the release button on the top of the external ring and fit it onto the conversion lens adapter ( ).

Set the camera to e mode.

Press the q button to choose e.

XThe shooting mode will switch between e

andwith each press.

Set [ND Filter] to [On].

Press the m button and use the op

buttons to choose

, then press the qr

buttons or use the  dial to choose

.

Configure the externally mounted flash.

Make settings as shown on Steps 4 – 5 on p. 167.

171