hAuto Exposure Bracketing (AEB)N

By changing the shutter speed or aperture automatically, the camera brackets the exposure up to ±3 stops in 1/3-stop increments for three successive shots. This is called AEB.

* AEB stands for Auto Exposure Bracketing.

1 2

AEB amount

Select [Expo. comp./AEB].

Under the [2] tab, select [Expo. comp./AEB], then press <0>.

Set the AEB amount.

Turn the <6> dial to set the AEB amount. You can set the exposure compensation amount with the <5> dial. If AEB is combined with exposure compensation, AEB will be applied centering on the exposure compensation amount.

ress <0> to set it.

XWhen you exit the menu, <h> and the AEB level will be displayed on the LCD panel.

3 Take the picture.

Focus and press the shutter button completely. The three bracketed shots will be taken in this sequence: Standard, decreased exposure, and increased exposure.

Canceling AEB

Follow steps 1 and 2 to turn off the AEB amount display.

AEB will be canceled automatically when you set the power switch to <2> or when the flash is ready to fire.

If the drive mode is set to <u>, you must press the shutter button three times. When <o> or <i> is set and you hold down the shutter button completely, the three bracketed shots will be taken continuously. Then the camera will stop shooting. When <Q> or <k> is set, the three bracketed shots will be taken continuously after a 10-sec. or 2-sec. delay. Neither flash nor bulb exposures can be used with AEB.

105