Using Wireless FlashN
[1 (A:B)] Multiple slave units in multiple groups
| Approx. 10m | |
|
| (32.8ft.) |
Indoors A | Approx. 7m | Approx. |
(23.0ft.) | B 7m | |
|
| (23.0ft.) |
Outdoors | 80o | Approx. |
|
| 5m (16.4ft.) |
Divide the slave units into groups A and B, and change the flash ratio to obtain the desired lighting effect. Refer to your Speedlite’s instruction manual to set one slave unit’s slave ID to A (Group A) and the other slave unit’s ID to B (Group
B)and position them as shown in the illustration.
1Set [Firing group] to [1 (A:B)].
2Set the desired flash ratio and shoot.
Select [A:B fire ratio] and set the flash ratio.
The 8:1 to 1:1 to 1:8 flash ratio is equivalent to 3:1 to 1:1 to 1:3 stops (1/2- stop increments).
124