Charging the Battery

Tips for Using the Battery and Charger

Recharge the battery on the day before or on the day it is to be used. Even during non-use or storage, a charged battery will gradually discharge and lose its power.

After recharging the battery, detach it and unplug the power cord or prongs from the power outlet.

You can attach the cover in a different orientation to indicate whether the battery has been recharged or not.

If the battery has been recharged, attach the

cover so that the battery-shaped hole <

 

> is

 

aligned over the blue sticker on the battery. If the battery is exhausted, attach the cover in the opposite orientation.

When not using the camera, remove the battery.

If the battery is left in the camera for a prolonged period, a small amount of power current is released, resulting in excess discharge and shorter battery life. Store the battery with the protective cover attached. Storing the battery after it is fully charged can lower the battery’s performance.

The battery charger can also be used in foreign countries. The battery charger is compatible with a 100 V AC to 240 V AC 50/60 Hz power source. If necessary, attach a commercially-available plug adapter for the respective country or region. Do not attach any portable voltage transformer to the battery charger. Doing so can damage the battery charger.

If the battery becomes exhausted quickly even after being fully charged, the battery has worn out.

Check the battery’s recharge performance (p.230) and purchase a new battery.

If the battery’s remaining capacity (p.230) is 94% or higher, the battery will not be recharged.

After disconnecting the charger’s power plug, do not touch the charger power plug (prongs) for at least 3 sec.

25