3Setting the Image-recording Quality

One-touch RAW+JPEGN

If the current recording quality is JPEG only, you can press the <P> button to also capture a RAW image (1by default) at the same time. If the current recording quality is RAW only, press the button to also capture a JPEG image (73by default).

This button will not work if the camera is already set (p.58) to capture RAW and JPEG images at the same time.

1Select [One-touch RAW+JPEG].

Under the [y] tab, select [One- touch RAW+JPEG], then press <0>.

2Select RAW or JPEG.

Turn the <5> dial and select RAW or

J EG, then press <0>.

3Select the image-recording quality.

Turn the <5> dial to select the image- recording quality, then press <0>.

4 Take the picture.

Press the <P> button.

X The image-recording quality will blink on the LCD panel. To cancel the setting, press the <P> button again. Press the shutter button completely to take the picture.

XAfter the picture is taken, the setting will be canceled.

This setting can also be combined with white balance bracketing and AEB shooting. You can also cancel the setting by pressing the <Q>, <M>, <A>, or <x> button or operating the Live View shooting/Movie shooting switch or power switch.

61