DUsing the Built-in Flash

Effective Range of Built-in Flash

 

[Approx. meters/feet]

 

 

 

 

 

 

 

 

 

 

Aperture

 

 

 

ISO Speed

 

 

 

 

 

100

200

400

800

1600

3200

6400

H: 12800

 

f/3.5

3.5 / 12

5 / 16

7 / 23

9.5 / 31

14 / 46

19 / 62

27 / 89

39 / 128

 

f/4

3 / 10

4 / 13

6 / 20

8.5 / 28

12 / 39

17 / 56

24 / 79

34 / 112

 

f/5.6

2 / 7

3 / 10

4.5 / 15

6 / 20

8.5 / 28

12 / 39

17 / 56

24 / 79

 

 

 

 

 

 

 

 

 

 

For close subjects, the subject should be at least 1 meter/3.3 feet away when using flash.

Detach the lens hood and keep at least 1 meter/3.3 feet away from the subject. If the lens has a hood attached or you are too close to the subject, the bottom of the picture might look dark due to the obstructed flash. If you use a telephoto lens or a fast lens and the built-in flash is still partially obstructed, use an EX-series Speedlite (sold separately).

3Using Red-eye Reduction

Using the red-eye reduction lamp before taking a flash picture can reduce red eye.

Under the [1] tab, select [Red-eye On/Off], then press <0>. Select [On], then press <0>.

For flash photography, when you press the shutter button halfway, the red-eye reduction lamp will light. Then when you press the shutter button completely, the picture will be taken.

The red-eye reduction feature is most effective when the subject looks at the red- eye reduction lamp, when the room is well lit, or when you go closer to the subject. When you press the shutter button halfway, the

display on the viewfinder bottom will gradually turn off. For best results, take the picture after this display turns off.

The effectiveness of red-eye reduction varies depending on the subject.

112