Checking the Focus
You can magnify the area of a recorded image that was inside the AF Frame, or the area of a face that was detected, to check the focus.
Touch l to switch the focus check display (p. 43).
XA white frame will appear where the AF frame or face was when the focus was set.
XA gray frame will appear on a face detected during playback.
XThe area within the orange frame appears magnified.
Switch frames.
●Move the zoom lever toward k once. XThe screen shown to the left will appear.
●Touch 
to move to a different frame when multiple frames appear.
Change the magnification level or location.
●Moving the zoom lever, or touching the
magnified image at the bottom right of the
screen, or 
will change the displayed magnification rate.
●If you drag across the image on the lower right, you can move the location of the displayed area.
●Touching Ú, or the image in the upper left resets the display to Step 1.
111