Changing the Color and Shooting

Color Swap

You can swap one color in an image for another when recording it. You can only swap one color.

Choose Y.

●Follow Steps 1 – 2 on p. 54 to choose Y.

Touch .

XThe unchanged image and the Color Swap image will both display.

●The default setting is to change green to

gray.

Specify the color to be swapped.

●Position the center frame so it is filled with the color you want and touch the frame at the bottom left of the screen.

XThe specified color will be recorded.

Specify the target color.

●Position the center frame so it is filled with the color you want and touch the frame at the bottom right of the screen.

XThe specified color will be recorded.

Specify the range of colors to be swapped.

●Touch opto change the range of colors to be retained.

●Choose a negative value to limit the range of colors. Choose a positive value to extend the range of colors to similar colors.

●Touching Ú restores the shooting screen.

• Using the flash may cause unexpected results in this mode.

• Under some conditions, the image may appear coarse.

96