Trimming
You can cut out a portion of a recorded image and save it as a new image file.
Trimming Area
Trimming Area Display
Recorded pixels after trimming
Choose [Trimming].
●Touch ø, then n to choose the 1 tab, and touch [Trimming].
Choose an image.
●Drag horizontally across the screen to choose an image, then touch [OK].
Adjust the trimming area.
XA frame will appear around the portion of the image to be trimmed.
XThe original image will display in the upper left and the trimmed image will display in the lower right.
●If you move the zoom lever, touch 
or the image at the bottom right of the screen, you can change the frame size.
●If you drag on the image at the upper left or the image at the bottom right, you can move the frame.
●If you touch 
, you can change the frame orientation.
●In an image with detected faces, gray frames appear around the faces located in the upper left image. The frames can be
used for trimming. You can switch between frames by touching 
.
●Touch [New File].
XThe [Save new image?] screen will appear.
Save as a new image and display.
●Follow Steps 4 and 5 on p. 126.
127