Troubleshooting Guide

High-speed sync cannot be set in the <f> mode.

Under [7Custom Functions (C.Fn)], set [2: Flash sync. speed in

Av mode] to [0: Auto] (p.218).

The camera makes a noise when it is shaken.

The built-in flash’s pop-up mechanism moves slightly. This is normal.

The shutter makes two shooting sounds during Live View shooting.

If you use flash, the shutter will make two sounds each time you shoot (p.123).

During Live View shooting and movie shooting, the Eicon appears.

It indicates that the camera’s internal temperature is high. If the <s> icon is white, the still photo’s image quality might deteriorate. If the <E> icon is red, it indicates that the Live View or movie shooting will soon be terminated automatically (p.136, 150).

Movie shooting terminates by itself.

If the card’s writing speed is slow, movie shooting may stop

automatically. Use an SD Speed Class 6 “ ” or faster card. To find out the card’s read/write speed, see the card manufacturer’s Web site, etc.

If a movie clip’s file size reaches 4 GB or the shooting length reaches 29 min. 59 sec., the movie shooting will stop automatically.

The image flickers or horizontal stripes appear during movie shooting.

Flickering, horizontal stripes (noise), or irregular exposures can be caused by fluorescent light, LED bulbs, or other artificial lighting during movie shooting. Also, changes in the exposure (brightness) or color tone might also be recorded.

246