Placing Cards

1 Set the feed selection lever to the standard feeding position (lower position).

2 Open the document feed tray.

3 Open the straight path tray.

CAUTION

Open the straight path tray when scanning cards. Scanning with the U-turn path may damage the card.

4 Adjust the document guides to fit the width of the card to be scanned.

5 Place the card.

Up to three non-embossed cards can be placed vertically or horizontally at one time. Embossed cards must be placed one at a time and vertically.

CAUTION

•Use the straight path when scanning cards.

•Embossed or laminated cards may not be scanned correctly, depending on the card.

•Ultrasonic double feed detection will not function properly when scanning cards. Clear the [Detect by Ultrasonic] check box in the [Feeding] tab.

Placing Folded Documents

Folio Scan enables you to scan documents that are larger than LTR/ A4 and therefore do not fit in the feeder. (The maximum size is 11" X 17"/A3.) To use the function, fold the document in half lengthwise and place it into the feeder. The DR-M140 will scan both sides and combine the scanned images into a single image.

1 Set the feed selection lever to the non separation feeding position (upper position).

2 Open the document feed tray.

3 Fold the document in half.

Crease the document firmly down its center to fold the document in half. Fold the document so that its edges are neatly aligned. If the document is not folded properly, paper jams may occur or distortions may appear in the combined scanned image.

IMPORTANT

A portion of the scanned image will be missing at the fold line.

29