4
5
6
Select the [Skew Detection] check box.
Click the [OK] button to close the settings screen.
Place the document as described in “Placing Documents” (see p. 27).
IMPORTANT
When this function is enabled, small documents and documents that have been placed to the left or right of the center of the feed inlet may be detected as skewed, and the scanning operation may stop. Place documents in the center of the feed inlet, or disable the skew detection function.
When a skewed document is detected
Feeding automatically stops when a skewed document is detected during scanning. The following error code is also displayed in the Job No. Indicator of the operating panel.
Skew detection error code
Also, a message screen is displayed to notify you that a skewed document has been detected.
Hint
If [Rapid recovery system] is enabled in the [Others] tab of the scanner driver settings screen, the following screen appears instead of the above message screen. In such cases, reload the document and click [Yes] to continue scanning.
34