2 Click the Start button, and then click [All Programs], [Canon DR-M140], and [Canon imageFORMULA Utility].

imageFORMULA Utility starts.

3 Click [CANON DR-M140 USB] and click [Properties].

Scanner properties are displayed.

4 Click the [Maintenance] tab, and then select a Long Document mode.

Select [Long Document Mode (1000 mm)] or [Long Document Mode (3000 mm)] depending on the length of the document.

5 Click [OK].

Detecting a document double feed

This scanner includes a function to detect document double feeds. By using this function, the scanner will automatically stop when it detects that multiple documents have been fed at the same time. You can also specify whether to save the scanned image after scanning has finished and continue scanning the document (double feed detection ignore function).

To use the double feed detection function, you must first open the scanner driver settings screen and enable double feed detection. It is also necessary to set [Rapid recovery system] to use the double feed detection ignore function.

Setting procedure

1 Start CapturePerfect. (See p. 48)

31