,_c_ Automatic Sensor Cleaning __,
Whenever you set the power switch to <ON> or <OFF>, the Self
Cleaning Sensor Unit operates to automatically shake off the dust on the front of the sensor. Normally, you need not pay attention to this
operation. However, you can execute the sensor cleaning at anytime as well as disable it.
Cleaning the Sensor Now
Select [Sensor cleaning].
_ Under the [_:] tab, select [Sensor cleaning], then press <_-_>.
Select [Clean now t_ ].
_ Select [Clean now_], then press
<8 > .
_ Select [OK] on the dialog screen, then press
_ The screen will indicate that the sensor is being cleaned. Although there will be a shutter sound, a picture is not taken.
[] _ For best Jesuits,d0 the Senso[ €!eaniogWhilethe Camerabott0m is placed 0n a table 0r other flat surface.
_ Even if yourepeat the sensor cleaning, the result will not !reprove that much, Right after the sensor cleaning is flnished_the [c!ean now _+c:]_
opt!on wi/! remain disab!ed temparad!Y_
DisablingAutomaticSensorCleaning
e_ In step 2, select [Auto cleaning _E_]. and set it to [Disable].
_y,,The sensor cleaning will no longer be executed when you set the power switch to <ON> or <OFF>.
