Canon 800 manual Incorrectly

Troubleshooting

Problem	Possible Cause	Try This
Printer is not	Power cable is not	Verify that the power cable is securely connected to the
responding	securely connected	printer and plugged into a working outlet.
	Printer is not turned	Verify that the POWER light is on and glowing a steady
	on, or is not ready	green.
		If the light is off, press the POWER button. The green light
		will blink as the printer is warming up, then go to a steady
		(no blink) state when the printer is ready.
		If the POWER light is blinking green, this indicates that the
		printer is warming up or is processing a print job.
		If the POWER light blinks orange, or green and orange
		alternately, see “Handling Error Messages” on page 42.
	Computer and/or	Reboot the computer and/or reset the printer.
	printer needs reset	To reboot the computer, close all open applications, then
		restart.
		To reset the printer, turn it off, then on again.
	Printer and computer	Reconnect the printer cable to the correct port, with the
	cabled together	correct cable. See the S800 Reference Guide on the Setup
	incorrectly	Software & Reference Guide CD-ROM for more information.
	Bad cable	Replace the printer cable.
Printing is slow	Incorrect printer driver	Altering driver settings may improve print speed. For
	or settings	example, draft mode is faster than normal mode, but the
		quality of the print is lower. See “Setting Driver Options” on
		page 15 for instructions on selecting the optimum print
		mode for a print job.
	Computer resources	You may not have enough memory (RAM) on your computer.
	are low; not enough	Close any open applications that are not needed for
	memory	printing.
		If the problem persists, consider adding more memory to
		your computer.

38