Canon 800 manual Delete all temporary files .tmp

		Troubleshooting
Problem	Possible Cause	Try This
Printing is slow	Computer resources	When a print job is sent to the printer, it first goes to a
(continued)	are low; not enough	temporary print spool. If the file is large and you have
	disk space	limited disk space available, this can slow or stop printing.
		Windows
		Delete all temporary files (.tmp).
		If you have Windows 98 or later, you can also run
		the Disk Cleanup utility:

1.From the Start menu, click Programs, then Accessories, then System Tools, then Disk Cleanup.

2.Select the drive you want to clean, then click OK.

3.Check Temporary Files, then click OK. The files will be deleted.

			Macintosh
			If you run out of disk space on your computer, copy
			any unused files to floppies, a zip disk or other
			removable media, then delete the files from your
			hard disk by dragging into the trash.
Printer tried to	Ink tanks are not	Check the ink tanks, and reseat them if necessary. See
print but no ink	seated properly	“Replacing Ink Tanks” on page 28.
on paper
	Printhead clogged	Verify that the printhead is working properly. See “Printing a
		Nozzle Check Pattern” on page 30, or “Cleaning the
		Printhead” on page 32.
		If necessary, perform multiple printhead cleanings. See the
		S800 Reference Guide on the Setup Software & Reference
		Guide CD-ROM for more information.
	Ink tanks may need to	Verify that you have sufficient ink in the ink tanks. See
	be replaced	“Monitoring Ink Levels” on page 27.
		If necessary, replace the ink tanks. See “Replacing Ink
		Tanks” on page 28.
	Printhead may need to	Verify that the printhead is working properly. See “Printing a
	be replaced	Nozzle Check Pattern” on page 30, or “Cleaning the
		Printhead” on page 32.
		If necessary, perform multiple printhead cleanings. See
		“Cleaning the Printhead” on page 32, or the S800 Reference
		Guide on the Setup Software & Reference Guide CD-ROM for
		more information.

39