Inserting the Battery Pack and Memory Card

Insert the included battery pack and a memory card (sold separately). Note that before using a new memory card (or a memory card formatted in another device), you should format the memory card with this camera

(1)

(2)

4 Close the cover.

●●Lower the cover (1) and hold it down as you slide it, until it clicks into the closed position (2).

Before Use

Basic Guide

Advanced Guide

(=80).

●● For guidelines on how many shots or hours of recording can be

1 Camera Basics

(2)

(1)

(1) (2)

1 Open the cover.

●●Slide the cover (1) and open it (2).

2 Insert the battery pack.

●●Holding the battery pack with the terminals (1) facing as shown, press the battery lock (2) in the direction of the arrow and insert the battery pack until the lock clicks shut.

●●If you insert the battery pack facing the wrong way, it cannot be locked into the correct position. Always confirm that the battery pack is facing the right way and locks when inserted.

saved on one memory card, see “Number of Shots per Memory Card” (= 115).

Removing the Battery Pack and Memory Card

Remove the battery pack.

●●Open the cover and press the battery lock in the direction of the arrow.

●●The battery pack will pop up.

Remove the memory card.

2 Auto Mode

3 Other Shooting Modes

4 P Mode

5 Playback Mode

6 Setting Menu

7 Accessories

8 Appendix

Index

3 Check the card’s write-protect tab and insert the memory card.

 

 

●●Recording is not possible on memory

 

 

cards with a write-protect tab when the

 

 

tab is in the locked position. Slide the tab

 

 

to the unlocked position.

 

 

●●Insert the memory card with the label (1)

(1)

facing as shown until it clicks into place.

●●Make sure the memory card is facing the right way when you insert it. Inserting memory cards facing the wrong way may damage the camera.

●●Push the memory card in until it clicks, and then slowly release it.

●●The memory card will pop up.

16