2 Configure the setting.
| ●●Press the [ ][ ] buttons to choose |
| [Display Time]. Press the [ ][ ] buttons |
| to choose the desired option. |
| ●●To restore the original setting, repeat this |
| process but choose [Quick]. |
Quick | Displays images only until you can shoot again. |
2 sec., 4 sec., | Displays images for the specified time. Even while |
the shot is displayed, you can take another shot by | |
8 sec. | pressing the shutter button halfway again. |
| |
Hold | Displays images until you press the shutter button halfway. |
Off | No image display after shots. |
Changing the Screen Displayed after Shots
Change the way images are displayed after shots as follows.
1 Set [Display Time] to [2 sec.], [4 sec.], [8 sec.], or [Hold] (=40).
2 Configure the setting.
| ●●Press the [ ][ ] buttons to choose |
| [Display Info]. Press the [ ][ ] buttons to |
| choose the desired option. |
| ●●To restore the original setting, repeat this |
| process but choose [Off]. |
Off | Displays only the image. |
Detailed | Displays shooting details (=106). |
●● When [Display Time] (=40) is set to [Off] or [Quick], [Display Info] is set to [Off] and cannot be changed.
●● By pressing the [
] button while an image is displayed after shooting, you can switch the display information. Note that the settings of [Display Info] are not changed. You can also erase images by pressing the [
] button, or protect (=67) or tag images as favorites (=72) by pressing the [
] button.
Before Use
Basic Guide
Advanced Guide
1 Camera Basics
2 Auto Mode
3 Other Shooting Modes
4 P Mode
5 Playback Mode
6 Setting Menu
7 Accessories
8 Appendix
Index
41