
3 Protect the image.
●●Press the [] button. A confirmation message is displayed.
●●Press the [ ][ ] buttons to choose [OK], and then press the [] button.
●● Images will not be protected if you switch to Shooting mode or turn the camera off before finishing the setup process in step 3.
Selecting a Range
1 Choose [Select Range].
●●Following step 2 in “Using the Menu” (=67), choose [Select Range] and press the [] button.
2 Choose a starting image.
●●Press the [] button.
●●Press the [ ][ ] buttons to choose an image, and then press the [] button.
3 Choose an ending image.
●●Press the [ ] button to choose [Last image], and then press the [] button.
●●Press the [ ][ ] buttons to choose an image, and then press the [] button.
●●Images before the first image cannot be selected as the last image.
4 Protect the images.
●●Press the [] button to choose [Protect], and then press the [
] button.
●● To cancel protection for groups of images, choose [Unlock] in step 4.
Before Use
Basic Guide
Advanced Guide
1 Camera Basics
2 Auto Mode
3 Other Shooting Modes
4 P Mode
5 Playback Mode
6 Setting Menu
7 Accessories
8 Appendix
Index
68