Appendix

zCompletely remove all dust and dirt from conversion lenses with a lens blower brush before use. The camera may focus on any dirt that remains.

zExercise due caution when handling the lenses since it is easy to dirty them with finger prints.

zBe careful not to drop the camera or adapter when removing the ring.

zWhen shooting with these attachments, please use the LCD monitor to compose your shots. The attachments block part of the view through the viewfinder, and the area shown in the viewfinder does not match the area of the shot that is actually recorded. Also, the angle of view cannot be confirmed in the viewfinder.

zYou should not shoot images in mode when using these attachments. Although it is possible to select this mode at the camera, the PhotoStitch software will not be able to stitch the images together at the computer.

Camera Care and Maintenance

Use the following procedures to clean the camera body, lens, viewfinder, LCD monitor and other parts.

Camera : Wipe the camera body with a soft

Body cloth or eyeglass lens wiper.

Lens : First use a lens blower brush to remove dust and dirt, then remove any remaining dirt wiping the lens lightly with a soft cloth.

z Never use synthetic cleaners on the camera body or lens. If dirt remains, contact the closest Canon Customer Support Help Desk as listed on the separate Canon Customer Support leaflet.

134