Canon A75, A85 Adjusting the Flash Output, effect using or, 2Select the photo, Press the FUNC. button, Press the FUNC. button, 3Press the FUNC. button

Shooting – Advanced Functions

1Select * (Effect OFF) in the FUNC. menu.

z See Selecting Menus and Settings (p. 64).

* The current setting is displayed.

2Select the photo

effect using or

.

z If the LCD monitor is on, you can check the photo effect by viewing the image on the LCD monitor.

z A shot can be taken immediately by pressing the shutter button. The menu will reappear after the shot, allowing you to adjust the settings easily.

3Press the FUNC. button.

Adjusting the Flash Output

Mode Dial

In mode, the flash output can be controlled in three steps when shooting.

1Select (Flash Output) from the FUNC. menu.

z See Selecting Menus

and Settings (p. 64).

2Adjust the flash output usingor.

z You can shoot the image right after selecting settings by pressing the shutter button. The menu displays again after the shot, allowing you to change the settings easily.

3Press the FUNC. button.

When the flash output is low, less shadow appears in the image. However, when shooting a wide scene or area, the image will likely be darker due to insufficient light. When adjusting the flash output, consider all the shooting conditions, including the distance to the subject.

86