3Connect an extension phone or an answering machine* to the jack.

You cannot use the extension phone while the fax is using the phone line.

Due to the range of specifications, Canon cannot guarantee that all answering machines will be compatible with your fax.

If you have connected an external device to your fax, be sure to select the correct receive mode (see Chapter 6).

If the extension phone does not have its own power supply, any redial data in the extension phone memory may be lost after an extended fax transmission.

*FAX-B820/B822 only.

Connecting the AC power cord ________________

Plug the fax into a 200 - 240 volt AC 50/60 Hz outlet.

1Plug the power cord connector into the rear of the fax.2Plug the other end of the power cord into a properly grounded AC power outlet.

There is no power switch on the fax. The power is on as long as the fax is plugged in.

Setting the language___________________________

You need to select the correct language for the LCD display and reports. See pp. 2-2, 2-3 for the buttons on the operation panel.

1Press [Start/Copy].

2Use [ ] or [ ] to select the preferred language for the LCD display and reports, then press [Start/Copy].

Registration ends and the fax enters standby mode.

1

UP SETTING

1-5