.
.
26
Attaching the AC adapter
Read the following precautions before attaching the AC adapter.
Use only the Universal AC Adapter AD-360U supplied with the printer.
Always use the AC adapter indoors, never outdoors.
In case of trouble (smoke, odd smells, etc.), unplug the AC adapter immediately.
Do not place anything in front of your power outlet that may obstruct your access to the power
supply or put pressure on the AC adapter or its cord.
When unplugging the AC adapter, always remove it by pulling the connector, never by pulling the
cord.
Do not unplug the AC adapter until you have switched off the printer. After you switch off the
printer if the CHARGE/ERROR lamp flashes green, this means the battery pack power is low.
Leave the AC adapter connected to the printer and plugged into a power outlet so the battery pack
can be recharged. While the battery pack is charging, the CHARGE/ERROR lamp lights and
remains on until the battery pack is fully charged. (The time required for recharging is four to six
hours.) When the CHARGE/ERROR lamp goes off, the battery pack is fully charged.
USE ONLY THE AC ADAPTER SUPPLIED WITH THE PRINTER. DO NOT USE AC ADAPTERS
FOR OTHER CANON BJ PRINTERS OR ADAPTERS INTENDED FOR USE WITH OTHER
ELECTRONIC DEVICES.
26