Attaching the Grip Unit

The grip unit can be attached in any of 24 positions (at 15º intervals) to give you a convenient grip angle for high- and low-angle shooting.

1 Set the Qswitch to OFF.

2 Unscrew the thumb rest and remove it from the camcorder.

3 Firmly insert the grip unit’s plug all the way into the grip unit connection terminal on the camcorder.

•Make sure to insert the plug all the way in, until the white line around the terminal is not visible.

• If the plug is not correctly connected (for example, if the white line around the terminal is partly visible), all the controls on the camcorder may be disabled.

4Attach the grip unit to the camcorder aligning it at the desired angle and tighten the grip unit’s lock screw.

Adjusting the Grip Belt

Adjust the grip belt so that you can reach the START/STOP button on the grip unit with your index finger but still have a comfortable but secure grip.

IMPORTANT

• Be careful not to drop the camcorder when adjusting the grip belt.

Attaching a Shoulder Strap

Pass the ends through the strap mount and adjust the length of the strap.

IMPORTANT

• Be careful not to drop the camcorder when attaching or adjusting the shoulder strap.

Preparing the Camcorder

35

White line