Configuring the Built-in Microphone’s Low-Cut Filter

1Open the [Int. Mic Low Cut] submenu.

[¡Audio Setup] >[Audio Input] >[Int. Mic Low Cut]

2 Select the desired option and then press the joystick.

Options

 

[Off]:

For recording audio under usual conditions.

[LC1]: For recording mainly people’s voices.

[LC2]:

For reducing the background sound of wind when recording

 

outdoors in windy surroundings (for example, on a beach or close to

 

buildings). Note that when you use this setting some low-frequency

 

sounds may be suppressed along with the sound of wind.

Selecting the Built-in Microphone’s Sensitivity

1Open the [Int. Mic Sensitivity] submenu.

[¡Audio Setup] >[Audio Input] >[Int. Mic Sensitivity]

2 Select the desired option and then press the joystick.

Options

[Normal]: For recording audio under usual conditions.

[High]:

For recording audio at a higher volume (+6 dB).

Activating the Microphone Attenuator

If the audio level is too high and the sound sounds distorted when recording with the built-in microphone or an external microphone connected to the MIC terminal, activate the microphone attenuator (built- in microphone: 12 dB, external microphone (MIC terminal): 20 dB).

1Open the [MIC/Int. Mic Att.] submenu.

[¡Audio Setup] >[Audio Input] >[MIC/Int. Mic Att.]

2 Select [On] and then press the joystick.

Recording Audio

[¡Audio Setup]

[Audio Input]

75

[Int. Mic Low Cut]

[Off]

[¡Audio Setup]

[Audio Input]

[Int. Mic Sensitivity]

[Normal]

[¡Audio Setup]

[Audio Input]

[MIC/Int. Mic Att.]

[Off]