Custom Picture Settings

[Offset]: Adjusts the sharpness level of dark areas in the image. Setting higher values will lower the sharpness

level. This setting can be adjusted from 0 to 50. (Default: 0)

[Noise Reduction]

94Reduces the amount of noise that appears in the image. Select a level from 1 (lowest level) to 12 (highest level), or select [Off] to turn the noise reduction off. (Default: [Off])

[Skin Detail]

The camcorder applies a softening filter to areas in the picture with skin tones to give a more pleasant appearance. By changing these settings, you can determine what areas will be detected as skin tones. A zebra pattern will appear over areas on the screen that are detected as having skin tones.

[Effect Level]: Adjusts the level of the filter. The available options are [Off], [Low], [Middle] and [High]. (Default: [Off])

[Hue]:

Adjusts the hue for detection of skin tones. This setting can be adjusted from -16 to 16.

 

(Default: ±0)

[Chroma]:

Adjusts the color saturation for detection of skin tones. This setting can be adjusted from 0 to 31.

 

(Default: 16)

[Area]:

Adjusts the color range for detection of skin tones. This setting can be adjusted from 0 to 31.

 

(Default: 16)

[Y Level]:

Adjusts the brightness for detection of skin tones. This setting can be adjusted from 0 to 31.

 

(Default: 16)

[Selective NR]

The camcorder detects the characteristics of a certain color or tone and applies a noise reduction filter to the targeted areas. A zebra pattern will appear over targeted areas on the screen.

[Effect Level]: Adjusts the level of the noise reduction filter. The available options are [Off], [Low], [Middle] and [High]. (Default: [Off])

[Hue]:

Adjusts the hue for the color to be detected. This setting can be adjusted from 0 to 31. (Default: 0)

[Chroma]:

Adjusts the color saturation for the color to be detected. This setting can be adjusted from 0 to 31.

 

(Default: 16)

[Area]:

Adjusts the color range for the color to be detected. This setting can be adjusted from 0 to 31.

 

(Default: 16)

[Y Level]:

Adjusts the brightness for the color to be detected. This setting can be adjusted from 0 to 31.

 

(Default: 16)

[Color Matrix]

Color matrix affects the color tones throughout the whole image.

[Select]: Available options are [Normal 1] to [Normal 4], [Cine 1] and [Cine 2], [EOS Std.], [Wide DR] and [Canon Log]. Generally, this should be the same setting as [Gamma]. After selecting an option, you can make more precise adjustments. (Default: [Normal 1])

[Gain]: Adjusts the color intensity. This setting can be adjusted from -50 to 50. (Default: ±0)

[Phase]: Adjusts the color phase. This setting can be adjusted from -18 to 18. (Default: ±0)

[R-G]: The R-G matrix changes the tint of the picture along the cyan/green and red/magenta gradations. This setting can be adjusted from -50 to 50. (Default: ±0)

[R-B]: The R-B matrix changes the tint of the picture along the cyan/blue and red/yellow gradations. This setting can be adjusted from -50 to 50. (Default: ±0)

[G-R]: The G-R matrix changes the tint of the picture along the magenta/red and green/cyan gradations. This setting can be adjusted from -50 to 50. (Default: ±0)

[G-B]: The G-B matrix changes the tint of the picture along the magenta/blue and green/yellow gradations. This setting can be adjusted from -50 to 50. (Default: ±0)

[B-R]: The B-R matrix changes the tint of the picture along the yellow/red and blue/cyan gradations. This setting can be adjusted from -50 to 50. (Default: ±0)