ISO Speed/Gain
Adjusting the ISO/Gain Value
1 | Press the ISO/GAIN button. |
| ||
| • The current ISO/gain value will be highlighted in orange. | 57 | ||
2 | Push the joystick up/down to select the desired ISO speed or | |||
| gain value and then press the joystick. |
|
|
|
|
|
| ||
• The selected ISO/gain value will be set and the display will return to normal.
• You can also adjust the ISO/gain value using only the joystick (A52).
NOTES
•When high ISO speeds or gain levels are set, the picture may flicker slightly. ISO 12800 / 30 dB gain and higher values in particular, allow you to shoot video with a higher sensitivity but are more prone to the appearance of noise.
•When high ISO speeds or gain levels are set, bright red, green or blue dots may appear on the screen. In such case, use a faster shutter speed (A53) or select a lower ISO speed or gain value.
•When the ISO speed or gain level is changed, some noise may appear momentarily on the screen. Do not adjust the ISO speed/gain level while recording.
•If you set an assignable button to [ISO/GAIN] (A85), you can press that button instead of the ISO/GAIN button to highlight the ISO/gain value.