Connecting the Camera to a Printer

You can make clear prints swiftly and easily when you connect the camera to an optional direct print function compatible printer (CP series) or a direct print function compatible Bubble Jet printer (optional). It can also be used with DPOF print settings.

You are recommended to use the Compact Power Adapter CA-560 to power the camera when it is connected to the printer. If you are using a battery pack, ensure that it is fully charged.

• Refer to the System Map included with this camera kit for information on direct print compatible printers (CP series).

•Please see your printer’s user guide for instructions on loading paper and installing ink cassettes / tanks.

Connecting to a Direct Print Function Compatible Printer (CP series)

Please use the cable (IFC-300PCU) supplied with the camera.

With the CP-100/CP-10 printer, please use the direct interface cable supplied with the printer. Two direct interface cables are supplied with the printer. Use the cable (DIF-100) that has a symbol on the connector to connect to this camera.

1Turn off the camera (p. 29).

2Attach the power cable to the printer and plug the other end into power supply, or, install the printer’s rechargeable battery.

Depending on the type of printer you have, it may or may not use rechargeable batteries. Refer to your printer’s user guide.

3

Open the LCD monitor.

 

136