Macro Mode

Use the macro mode to shoot close-ups of subjects in the range of 5 to 50 cm (0.16 to 1.6 ft.) at wide angle end and 15 to 50 cm (0.49 to 1.6 ft.) at telephoto end.

1Press the button to turn the LCD monitor on.

2Press the button.

• The icon appears on the display panel and on the LCD monitor.

• Press the button again to cancel the macro mode.

3Shoot the image.

•The indicator beside the viewfinder will light yellow when the shutter button is pressed halfway.

•Shooting procedures are the same as for theMode (p. 51).

In macro mode, the correct image brightness sometimes cannot be obtained with flash photography. Please set the ND filter to [On] and use the separately sold Macro Ring Lite MR-14EX or the Macro Twin Lite MT-24EX for flash photography in the

macro mode. Use the or mode and set the aperture to a higher value as required by the shooting conditions.

• Some settings are not available with certain Shooting modes. Please refer to Functions Available in Each Shooting Mode (p. 208).

•Always use the LCD monitor to compose images in macro mode. Shooting with the viewfinder is possible, though, the parallax phenomenon may cause images composed with the optical viewfinder to be off-center.

•When the lens is zoomed to the wide angle end, the recordable area is approximately 75 x 55 mm (3.0 x 2.2 in.) at the closest focal distance, and at telephoto end, it is approximately 56 x 42 mm (2.2 x 1.7 in.), roughly the size of a business card. If optional Close-up Lens 250D 58mm (p. 184) is used in macro mode, the recordable area is approximately 37 x 28 mm (1.5 x 1.1 in.) at maximum telephoto.

Shooting - Letting the Camera Select Settings

69