3 Select images for transferring.
Single Images•Select an image using the main dial or the B or A arrow on the omni selector and mark or remove marks from images using the C or D arrow on the omni selector.
•You can use the same procedures to select images in index replay (3 images). Press the 
button to switch between single replay and index replay.
All the Images on a CF Card
•Press the 
button to switch to index replay (three images).
•Then press the 
button, and select [Mark all] using the C or D arrow on the omni selector and
press the 
button again. (If you select [Clear all] instead of [Mark all], you can remove marks from all the images.)
•You can select images using the main dial or the B or A arrow on the omni selector and change the settings using the C or D arrow on the omni selector after [Mark all] or [Clear all] has been selected.
4 Press the 
button.
The selection mode will turn off and the Transfer Order menu will reappear.
• Images are transferred in order from oldest to newest by the shooting date.
• A maximum of 998 images can be marked per CF card.
Printing, Transferring
153