Avoiding Left Over Paper
Note the following to prevent wasted paper, which occurs if ink is consumed faster than the paper.
•Do not turn the sprocket too much when removing slack from the ink sheet (=8).
•To cancel printing in progress, always press the <v> button; after pressing the <v> button, never turn off the power before SELPHY is finished printing (step 6).
•If a message indicates that the paper has run out, add paper without turning off the printer or removing the ink cassette (step 7). Otherwise, press the <v> button to cancel printing (step 6).
Note that under some conditions, even if you follow these instructions, ink may be consumed faster than the paper, leaving you with excess paper.
Printing from USB Flash Drives
Images on USB flash drives (sold separately) can be printed the same way as images on memory cards.
Insert a USB flash drive.
zzRemove any inserted memory cards. zzInsert a USB flash drive as shown.
zzAfter this, all steps are the same as for printing images from memory cards (=14 – 15).
• Some USB flash drives may be more difficult than others to insert and remove, and some may not work as expected.
•For instructions, refer to the flash drive user manual.
Making One Print from a Selected Image
For a convenient way to make a single print of a selected image, follow these steps.
Choose and print an image.
zzChoose an image as described in steps 1 – 4 of “Printing Images” (=14).
zzPress the <p> button for a single print of the selected image.
•A single print is not produced this way if you follow steps 4 – 5 in
“Printing Images” (=14) to choose images and the number
of prints. To use this method for individual prints, make sure the number of prints is [0] in step 4 on =14 beforehand.
Cover
Contents
Part Names
Basic Operations
Print Settings
Printing via
Printing via USB Cable
Troubleshooting
Appendix
16