Cropping Images
Print only selected areas of an image as follows.
1 Access the cropping screen.
zzChoose an image as described in step 4 of “Printing Images” (=14), press the EDIT button, and then press the <o> button.
zzA crop frame is displayed, showing the image area that will be cropped.
2 Adjust the image area to crop.
zzTo switch the crop frame between portrait and landscape orientation, press the EDIT button.
zzTo move the crop frame, press the <u><d><l><r> buttons.
zzTo enlarge the crop frame, press the
3 Confirm the setting.
zzTo confirm the cropping area and return to the image display screen, press the <o> button. 
is now shown in the lower left.
zzTo crop other images for printing with the first one, repeat steps 1 – 3.
4 Print.
zzPrint as described in step 6 of “Printing Images” (=15).
zzAfter printing, crop settings are cleared.
•To adjust the cropping area once you have set it, press the EDIT button on the image display screen, press the <u><d> buttons to select [Adjust Cropping], and then press the <o> button. Repeat steps 2 – 3.
•To cancel cropping after you have set the cropping area, press the EDIT button on the image display screen, press the <u><d> buttons to select [Reset Cropping], press the <o> button to access the reset cropping screen, and then press the <o> button again.
•Cropping areas you have set are cleared if you turn off SELPHY or remove the memory card before printing.
•You can specify cropping for up to 99 images at once.
•Cropping is not available when printing with [Print All Images] or [DPOF Print]
or when [Page Layout] (=25) is set to [ 
Index] or [ 
Shuffle].
•The cropping aspect ratio indicated by the frame displayed on images cannot be adjusted.
•To change the number of prints, press the <u><d> buttons on the image display screen in step 3. Note that specifying zero prints will not clear cropping settings.
Cover
Contents
Part Names
Basic Operations
Print Settings
Printing via
Printing via USB Cable
Troubleshooting
Appendix
20