zzThe screen at left is displayed.

•Selecting an unprotected access point in step 7 and pressing the <o> button will display the screen in step 9.

•Up to 20 access points are listed. If your desired access point is not listed, press the <v> button and select [Manual Settings] in step 6 on =40 to specify the access point manually. Follow on-screen instructions and enter the SSID, security settings, and the password (=45).

•If WEP security is used and you enter the wrong password in step 8, when you press the <o> button and then press the <o> button again after the message, you will go to step 9, but printing is not possible. Check the access point password and try to connect again, starting at step 3.

•On SELPHY, wireless signal strength is indicated by the following icons.

[ ] High, [ ] Medium, [] Low, [] Weak, [] Out-of-range

Subsequent Connections

zzOnce you have connected to an access point, the printer will automatically reconnect to the previous access point whenever you turn it on again, and the standby screen at left will be displayed.

zzIf connection fails because the access point is off or for another reason, [] will be displayed. Check access point settings (=56).

zzEven during standby, you can print images on a memory card by inserting the card to access the screen in step 4 on =14.

zzAutomatic access point connection at startup can also be disabled (=44).

Cover

Contents

Part Names

Basic Operations

Print Settings

Printing via Wi-Fi

Printing via USB Cable

Troubleshooting

Appendix

41