6Choose the access point connection method.
zzPress the <u><d> buttons to select [WPS Connection], and then press the <o> button.
7Choose the WPS connection method.
zzPress the <u><d> buttons to select [PBC Method], and then press the <o> button.
zzThe screen at left is displayed.
8On the access point, hold down the WPS connection button for
a few seconds.
zzFor details on where the button is located and how long to press it, check the access point user manual.
9 Establish the connection.
zzOn the printer, press the <o> button.
zz[Connecting] is displayed on the printer, followed by [Connected to access point] when connected. Press the <o> button.
zzThe screen at left is displayed, indicating the name of the access point.
•If you selected [PIN Method] in step 7, use the computer to specify the PIN code (displayed on the printer) on the access point, press the <o> button on the printer, and go to step 9. For instructions on configuring PIN codes, refer to the access point user manual.
•On SELPHY, wireless signal strength is indicated by the following icons.
[
] High, [
] Medium, [
] Low, [
] Weak, [
]
Cover
Contents
Part Names
Basic Operations
Print Settings
Printing via 
Printing via USB Cable
Troubleshooting
Appendix
38