Choosing the Finish (Print Finish)
Example of finish
[Glossy] | [Pattern 1] | [Pattern 2] |
zzBy adding a subtle texture to the surface of prints, you can create a less glossy finish.
Glossy (default) Prints with a glossy surface finish.
Pattern 1 | Applies a slightly rough surface pattern, for a less glossy finish. |
Pattern 2 | Applies a fine surface pattern, for a less glossy finish. |
|
|
•The surface finish may be less noticeable depending on the
printer’s internal temperature when you turn it on. Before turning on the printer and printing, wait until it has adjusted to an ambient temperature of 10 – 35 °C (50 – 95 °F).
• Turning off SELPHY will restore the default setting of [Glossy].
•You can have SELPHY retain configured settings even after being turned off. With SELPHY off, hold down the <k><u><p> buttons, and then hold down the <q> button until “SELPHY” is displayed. If you prefer SELPHY not to retain configured settings, repeat this procedure after turning SELPHY off. This procedure also determines whether SELPHY retains [Page Layout] (=25) settings when turned off.
Printing with a Border around Images (Borders)
zzPrint images with or without a border.
zzBorderless (default) / Bordered
• Turning off SELPHY will restore the default setting of [ Borderless].
•Images are printed without borders when [Page Layout] (=25) is set to [ Index] or [ Shuffle].
•n
when [ age Layout] (=25) is set to [
Cover
Contents
Part Names
Basic Operations
Print Settings
Printing via
Printing via USB Cable
Troubleshooting
Appendix
24