Printing without a Power Outlet
To print where no power outlet is available, use Battery Pack
*According to Canon testing. May vary depending on printing conditions.
Attaching the Battery Pack
1Remove the battery terminal cover.
2 Attach the battery pack to the charger adapter.
zzSlide the
Charging the Battery Pack
Connect the power cord to the charger adapter with the battery pack inserted.
zzBattery charging begins, and the orange lamp is lit.
zzWhen charging is finished in about four hours, the green lamp will be lit.
zzCharging continues if you turn on SELPHY with the charger adapter connected but will stop while printing.
Battery- owered Printing
Connect the charger adapter to
SELPHY.
• For battery precautions, refer to the battery user manual.
• Keep the charger adapter on a desk or other stable surface while it is connected to SELPHY, and be careful not to unplug the cable by mistake.
Cover
Contents
Part Names
Basic Operations
Print Settings
Printing via
Printing via USB Cable
Troubleshooting
Appendix
59