-8-
4. Preparation
Please ask a Canon representative or distributor to perform installation of this instrument.
4.1 Power Cable Connections
1Check that the power switch of the retinal camera is set to the O position (OFF).
2Connect the power cable to the retinal camera.
Insert the power cable connector firmly into the AC
power connector while holding down the retinal
camera with your hand.
3Insert the power plug into the AC outlet.
Insert the plug all the way into the AC outlet.
WARNING Be sure to operate this instrument using the power supply described in the
specifications. Otherwise, it may result in fire or electric shock.
WARNING
Be sure to turn OFF the power before plugging or unplugging the cables as
indicated in this manual. Also, do not handle it with wet hands. Otherwise,
you may get an electric shock that may result in death or serious injury.
CAUTION
Before connecting or disconnecting the cables, be sure to hold the
instrument firmly in order to ensure safety.
Otherwise, the main unit may fall over, possibly causing injury.
CAUTION Always use a grounded AC outlet for a 3-pin plug as the power outlet.
OFF ON