Canon CX-1 5, 6, 1, 2

7. Daily Inspection and Maintenance

-50-

5Remove the DC coupler.

Open the battery compartment cover on the digital

camera, and then slide the battery lock lever to remove

the DC coupler.

After removing the DC coupler, close the battery

compartment cover.

6Attach the cap to the camera mount.

Attach the mount cap to the retinal camera mount.

Also attach the body cap to the digital camera.

Note: The digital retinal camera CX-1 is already installed with an digital camera for this

instrument. Please take careful note of the following points if the digital camera must be

removed or installed.

• Perform the work quickly in a clean room.

• If the digital camera will be removed and stored, be sure to attach the supplied mount

cap to the retinal camera body and the body cap to the digital camera.

• Wipe off any dust or other substances on the caps before attaching them.

7.5.2 Installing the Digital Camera

1Turn off the power of the retinal camera.

Press the power switch of the retinal camera to the O side (OFF).

2Attach the DC coupler to the digital camera.

Open the battery compartment cover on the digital

camera, and attach the DC coupler.

After attaching the DC coupler, pass the cord through

the DC coupler cord hole, and then close the battery

compartment cover.

Contents

Main PLEASE NOTE For California, USA Only European Union (and EEA*) only. Safety Information Regulations For U.S.A. and Canada For EU Countries Fr Deutschland General Safety Information Safety Precautions Page Page Page Page Components Optional Units Contents Page 1. Features 2. Notes for Using the Instrument Digital camera Before use After use Cleaning and disinfection Environment of use Installation Others 3. Names of Parts 3.1 Main Unit Page 3.2 Operation Panel 3.3 Observation Monitor and Viewfinder Observation monitor (with x1.3 magnification) Viewfinder 4. Preparation 1 2 3 4.2 Connecting to a Computer 1 2 3 4.3 Carrying the Instrument WARNING 1 2 3 4 5. Basic Photography 5.1 Before Taking Photographs 5.1.1 Turn On the Power 1 2 3 1 2 3 5.2 Photography Flow 5.3 Non-Mydriatic Mode 5.3.1 Color Photography Mode 2 3 4 CAUTION 5 6 7 8 9 10 11 12 13 14 15 5.3.2 Red-free Photography Mode 3 2 Page Page 5.3.5 Fundus Autofluorescence Mode 3 5.4 Mydriatic Mode 5.4.1 Color Photography Mode 2 3 4 CAUTION 5 6 7 8 9 10 11 12 13 15 14 Page Page 5.4.5 Fundus Autofluorescence Mode 2 3 6. Photography Auxiliary Functions 6.1 Using the Focus Indicator 6.2 2 photography function 6.3 Small pupil photography function 6.4 Diopter Compensation Function 6.5 Panning Function and Tilting Function 6.5.1 Panning Function 6.5.2 Tilting Function 6.6 Using the External Monitor 1 2 3 4 5 6 7. Daily Inspection and Maintenance 7.1 Inspection CAUTION 7.1.1 Before Turning ON the Power 7.1.2 Turning ON the Power 7.2 Before Calling a Service Technician 7.2.1 Troubleshooting Page Page 7.3 Cleaning and Disinfection 7.3.1 Objective Lens 1 2 3 4 5 7.3.2 Viewfinder CAUTION 7.3.3 Forehead Rest Page Page 7.5 Removing and Installing the Digital Camera 7.5.1 Removing the Digital Camera 1 2 3 4 5 6 7.5.2 Installing the Digital Camera 1 2 3 4 5 7.5.3 Cleaning the Digital Camera (imaging sensor) 1 2 3 8. Main Specifications and Performance 8.1 Main Specifications 8.2 Functions in the Observation and Photography Modes 8.3 Guidance and Manufacturers Declaration for EMC Directive Electromagnetic Emissions Electromagnetic Immunity Page Page 9. Service Information Repair Limit for Supplying Performance Parts for Repair Expendable Parts Replaced by Service Person