Starting the Remote UI

Starting the Remote UI

To start the Remote UI, follow the procedure described below.

Before you start the Remote UI, perform the following:

–Select <VIEW IP ADDRESS> in <NETWORK SETTINGS> located in the <SYSTEM SETTINGS>, and verify the IP address of the machine. If you do not know the IP address, consult with your network administrator. (See “Confirming IPv4 Address Settings and Checking IPv4 Connection,” or “Confirming IPv6 Address Settings,” in “Network Settings (D460 Only),” in the e- Manual.)

–Set <USE HTTP> to <ON> in <SYSTEM SETTINGS>. (See “Setting the Use of HTTP,” in “Network Settings (D460 Only),” in the e-Manual.)

Only) (D460 PC a from Settings

1

Prepare the Network.

Set up the machine for use in a network, then

connect the machine and the computer to your network router or a hub.

For details, see “Set Up Network Connection (D460 Only),” in the Starter Guide, or “Set Up Network Connection (D460 Only),” in “Setting Up the Machine,” in the e-Manual.

3

Enter the IP address of the machine in

[Address] or [Location], then press [Enter]

on the keyboard.

For details on how to check the IP address, see “Confirming IPv4 Address Settings and Checking IPv4 Connection,” or “Confirming IPv6 Address Settings,” in “Network Settings (D460 Only),” in the e-Manual.

The Remote UI screen appears.

2

Start the web browser.

7-4